How thick can ardex be poured?

ARDEX K 521™ is a pourable, polishable, self-leveling topping for fast-track resurfacing of indoor concrete. ARDEX K 521 can be installed from a minimum thickness of 3/8″ (9 mm) up to a maximum thickness of 2″ (5 cm). Use ARDEX K 521 to provide a polished, “aggregate-exposed” surface.

Can ardex be polished?

ARDEX PC-T hardens fast due to its unique self-drying formulation – it can be polished in as little as 24 hours. ARDEX PC-T is ideal in areas such as retail stores, schools, warehouses, airports and all interiors where a polished concrete surface is desired.

How thick can self-leveling be?

QUIKRETE® Fast-Setting Self-Leveling Floor Resurfacer (No. 1249-51) can be installed from 1-1/2 inch (38 mm) thick to a feather edge, although a ¼ inch (6.3 mm) minimum thickness is required for heavy traffic areas.

How thick can you apply ardex feather finish?

ARDEX FEATHER FINISH can be easily applied with a steel trowel, and used at a true feather edge, or up to 3mm in thickness. For thicknesses of 3mm, and not exceeding 12mm, it is recommended to build up in thin applications or alternatively consult the ARDEX ARDURAPID A 45 datasheet.

Does ardex k15 need primer?

Standard absorbent concrete must be primed with ARDEX P 51™ PRIMER diluted 1:1 with water. Apply evenly with a soft bristled push broom. Do not use paint rollers, mops or spray equipment.

Can ardex be used outside?

ARDEX X 90 OUTDOOR can be installed over substrates with temperatures as low as 40˚F (5˚C) and can withstand driving rains or be grouted in only 2 hours.

What is polished concrete overlay?

Available for both residential and commercial projects, polished concrete topping (PCT) is a cement based, self-leveling topping for internal floors that will produce a polished concrete surface. With its high durability and ease of maintenance, PCT has a number of outstanding benefits; View More. Covet ©

Will self-leveling concrete crack?

It will cost you but, as always, you get what you pay for. A DIY self-levelling cement job might look good for a few months, maybe even a couple years. But if it’s not done properly, eventually it can start to crack. If your floors move or bounce, that cement can crack, too.

How much does a 50 lb bag of self leveler cover?

Coverage: One 50 Lb. bag will cover approximately 40 Sq. Ft. at 1/8 In.

Is Henry feather finish the same as ardex?

The Henry Feather Finish is the same stuff as is in this Ardex bag. They are made by the exact same company -just different packaging. I found the Henry at Home Depot. You just have to search because different territories in the US carry different products and brands.

Does ARDEX FEATHER FINISH need primer?

ARDEX FEATHER FINISH allows the installation of most types of floor covering in as little as 15 minutes over all types of interior concrete, masonry, wood, terrazzo, and ceramic and quarry tile – as well as properly prepared residues of cutback and other non-water-soluble adhesives on concrete – all without the need

Can you epoxy over ardex?

ARDEX K 15® is the original and the most specified self-leveler in North America. Install over: interior concrete, terrazzo, ceramic and quarry tile, epoxy coating systems, wood, metal and non-water soluble adhesive residue on concrete; can be installed over concrete treated with certain curing compounds.

What is RDEX?

Information ARDEX CD™

ARDEX CD™ is a concrete resurfacing compound modified with high-performance polymers for exceptional bond strength. ARDEX CD can be used over the surface of existing concrete to produce a new wear layer as well as to fill in small surface defects, such as spalls and gouges.