How do you make a fiberglass slide?

Mix two gallons of the fiberglass epoxy resin and the hardener (2:1 ratio) in a plastic bucket. Use a new fiberglass roller and apply three coats of epoxy resin to the entire interior of the slide, spacing the applications two hours apart. Allow the epoxy resin to cure for 24 hours.

How do you make a fiberglass slide slippery?

How to Make a Slide Slippery the Safe Way
Make a Cleaning Solution. Make a cleaning solution using warm water and a mild dish detergent. Scrub Down the Slide. You’ll want to use an abrasive rag or hand towel to scrub the slide from top to bottom. Let it Dry. Wax the Slide Itself. Sand the Slide Surface (If Needed)

Can you fix a fiberglass slide?

Fiberglass slide cracks are more common. Gelcoat repair kits can be purchased, or your slide could be completely recoated, by a local boat repair company.

How do you fix a crack in a fiberglass slide?

Mix the fiberglass filler with the hardener using a small bucket and a stir stick. Follow the recommendations on the container for the correct amount of hardener. Apply the filler to the cracks using a putty knife. Smooth the filler out so it’s flat and level with the surrounding fiberglass.

Can a fiberglass pool slide be painted?

According to In The Swim, the only kind of paint that should be used on fiberglass pools is an epoxy pool paint. For fiberglass pool slides, use a product made specifically for this, such as EP Epoxy Pool Paint. This works on painted and unpainted surfaces and produces a tile-like, high-gloss finish.

How do you make a slide go down faster?

After the initial waxing of your slide may have to reapply every couple of months. The easiest (and most fun) way to do this is to tear out a large piece of the wax paper and let you kid sit on it while “sledding” down the slide. Just be sure to supervise, as they will go down fast!

How do you make a wooden slide slippery?

There are multiple ways to make a wooden slide slippery. The most traditional way is to rub a decent amount of olive oil on the slides. Other methods include manual sanding of wood using sandpaper, replacing laminate, or simply rubbing wax over the slide.

How do you care for a fiberglass pool slide?

A good option is something like dish soap and a small cloth. For deeper cleaning, you can use a granulated chlorine power (just not chlorine shock). Be careful never to scrub too vigorously for fear of harming the slide’s finish. Windex is a good way to polish slide surfaces as well as aluminum laders.

How much is a slide?

The cost of a commercial playground slide can vary greatly. You can typically find them priced anywhere from $1,500 to $20,000 but the average cost is around $3,000-5,000.

What kind of paint do you use on a pool slide?

About Epoxy Pool and Fountain Paint

High Performance Epoxy Pool Paint is designed to provide long lasting protection for concrete, plaster, gunite, and fiberglass swimming pools, slides, and spas.

How do you fix a broken slide?

The usual practice of repairing a broken slide is to use Scotch Tape; but often fine splintering with loss of some part of the slide results in loose-jointed coherence, making impossible placing the slide on the stage of a microscope or filing it in a slide box with compartments.

Can you wax a pool slide?

Waxing in the spring and fall will help protect the slides finish and provide a good added barrier to the harsh UV rays of the sun. The wax is generally all that is needed to maintain the slide and help keeps its original gloss as long as you start the maintenance process early, before there are problems.

What is aquaBRIGHT?

aquaBRIGHT is a long lasting stain and crack resistant thermo-polymer finish that comes with an industry leading 10 year pro rata warranty. aquaBRIGHT is a pool finish suitable for fibreglass and concrete pool renovations, new builds, pool resurfacing, and is designed to simplify pool maintenance.