If the car stereo display says error e, you had a power loss to the stereo and the error e means the wrong 5 digit code for the stereo was input incorrectly 9 times and now is locked. Disconnect the car battery for 1 minute and reconnect battery and now the stereo displays “code”.

How do I reset my Honda radio error E code?

If the radio displays and error (ERR) message, disconnect the black negative under hood battery cable for 1 to 3 minutes to reset the system). TURN THE RADIO BACK ON AND LOOK FOR THE WORD “CODE”. ENTER THE 5 DIGIT RADIO CODE. THE RADIO SHOULD COME BACK ON.

How do I unlock my Honda radio code?

Press and hold radio buttons 1 and 6 simultaneously. While pressing radio buttons 1 and 6, use your free hand to turn the radio ON. While still holding the buttons, you should see an eight-digit serial number on the radio’s screen. Some older models might display two separate serial numbers simultaneously.

How do you unlock a Honda radio without the code?

In most cases, you can just press and hold the power button for 2 seconds and the radio will automatically reset and start working properly without entering the code.

How do I reset my Honda radio after changing the battery?

How to Reset My Honda Radio After Putting in a New Battery
Turn the ignition key to the “On” position, but don’t start the engine.Turn the radio on by pressing in on the volume control knob. After 10 seconds, turn the radio off. Press and hold the power button for two to five seconds and watch the radio display.

How do I unlock my car radio without the code?

Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.

What does code error E mean?

If the car stereo display says error e, you had a power loss to the stereo and the error e means the wrong 5 digit code for the stereo was input incorrectly 9 times and now is locked. Disconnect the car battery for 1 minute and reconnect battery and now the stereo displays “code”.

How do I reset my radio code?

Complete the following series of steps to reset your radio code:
Turn the vehicle ignition to ON or AUX, but do not start the engine.Turn on the radio. The radio should show the word CODE.Enter the five-digit code, and the radio should return to normal.

How can I get my Honda radio code online?

If you have the Honda radio code error and want to fix it without visiting the dealer, you can go online to retrieve your code. Go to with your ZIP code, VIN, and radio serial number.

How many digits is a Honda radio code?

4) Look in your glove box and center console

In some Honda models, you’ll find a four- or five-digit number that represents your Code, or an eight-digit number that represents your Serial Number in the glove box or center console.

Why does my radio say code?

The radio should still say “CODE” — that simply means the security system kicked on because it lost power from your battery.

What does code error e mean on a Honda Odyssey?

Sometimes you might encounter your honda radio displaying error code e and wonder what might be the cause. But relax, when you see that error, it simply means that you have entered radio code more than three times, so you are locked out. Honda will ask for a radio code every time you replace the battery.

What is my Honda Accord radio code?

There are a few ways to retrieve your Honda Accord’s radio code: Look inside your glovebox or owner’s manual for the code. You’ll find it on a sticker with the radio serial number. Visit our Honda service center at Airport Marina Honda near Culver City.