To reset your T701 thermostat, remove the battery cover and then remove the batteries. Wait 10 to 20 seconds and then replace the batteries and the cover. This should reset your thermostat and possibly fix the display issue.

How do I reset my thermostat?

Reset the Thermostat

The method to reset your thermostat will vary depending on the model. Common methods for resetting a thermostat include installing the battery backward for five seconds, pushing a recessed reset button with a pin or paper clip, or shutting off the breaker to the thermostat for 30 seconds.

Is there a reset button on a pro thermostat?

Reset to Factory Default Settings

To reset the Honeywell T5+ / T5 / T6 Pro Series Thermostats to factory default settings, you should follow these steps: Check whether the device is on (it should be on). Press the menu button and hold it for 5 seconds. Now scroll to the left and stop when you see ‘Reset’.

Why is my Pro1 thermostat not working?

Your Pro1 Thermostat may stop working correctly because of incorrect settings, low or completely drained batteries, dust, loose wires, and the like.

How do I reset my GE thermostat?

Here are the step-by-step reset instructions:
Turn your thermostat off by switching it to the off position.Find the breaker that powers your HVAC system and turn it off.Wait 30 seconds and turn the breaker back on.Turn your thermostat back on.

How do you reset a thermostat after replacing the battery?

Here’s how:
Power off the thermostat and remove the batteries.Put the batteries in the wrong way, with negative to positive and positive to negative.Wait ten seconds and put them back in the correct way.Your thermostat will be reset to factory settings. Be sure to reprogram your thermostat to your normal schedule.

Why is my thermostat stuck on one temperature?

Recalibrating Your Thermostat

This is most commonly a problem if you have a newer thermostat or have recently lost power due to a power outage or low batteries. An old thermostat may also need recalibration over time. If your thermostat doesn’t stay calibrated properly, you may need to replace it.

Why is my thermostat reading the wrong temperature?

One of the most common reasons that your thermostat is incorrectly reading your home’s temperature is that the temperature sensor is malfunctioning or has failed completely. Cleaning the inside of your thermostat may fix the issue. If there is too much dust inside, the sensor will have trouble working correctly.

What does a blinking snowflake mean on a thermostat?

Check the thermostat’s display to confirm that there’s a call for cooling, usually indicated by the words “cool on” or a snowflake icon. If the “cool on” or the snowflake icon is flashing, the thermostat is in delay mode, which can take up to 5 minutes. This delay is to protect your equipment from short cycling.

Why is my air conditioner thermostat not working?

Check whether the thermostat’s display is lit. If it is not, the thermostat cannot signal the air conditioner to cycle on. Look for and address simple reasons why the thermostat isn’t getting power, such as dead batteries or a tripped breaker or blown fuse in your main electrical service panel.

Why does my thermostat setting not match my home’s temperature?

Clean the Thermostat

Sometimes when the room temperature doesn’t match the thermostat setting, the problem could be a dirt buildup in its interior parts. As part of a furnace or air conditioning tune-up, a professional will inspect and clean the wiring of your thermostat so you won’t have to worry about this issue!

What happens when thermostat battery dies?

When your thermostat batteries die, you will see a black screen, the thermostat will stop working, and the heating or cooling units will not work. If, after the change of batteries, the thermostat and the heating and cooling systems start working, then everything should be back to working as normal.

Why is heat on flashing on my thermostat?

“Cool On” or “Heat On” is Blinking

If this set of words or the illustration is blinking, your thermostat is in a five-minute delay state. This feature stops your equipment from damaging short cycling. This could occur if you lose power.