If unable to shake the jammed staple out, try to staple a single sheet of paper while the unit is jammed. This could possibly force the jam outward, clearing the unit. If this does not work, try using any sizable tool or nearby accessory, try to fish out the jammed staple through the “front teeth” of the stapler.

Why is my stapler not working?

When any important part is broken or worn out, the tool simply won’t work. Before you start using a staple gun, check to ensure the spring, hammer, and rail are correctly assembled and undamaged. Small variances can gum up the works and cause staples to jam or defeat the spring or hammer mechanisms.

Why is my stapler stapling backwards?

The setting most people use is the one that causes the legs of the staple to bend inward to hold a stack of papers firmly together. This is the “staple” or “reflexive” setting. If the user reverses the strike plate, the staple’s legs will splay outwards when they come through the paper. This is the “pinning” setting.

How do you unblock a staple gun?

Clear the jam with needle-nose pliers.

Check out the top of the stapler where the staples are discharged. Use the pliers to pinch the staple and pull towards you, pulling the staple out of the stapler’s nose. After that, reassemble the staple gun by putting the magazine back in and screwing in the screw.

What is the screw on top of a staple gun for?

The pressure screw (C) may be adjusted so that it will apply the appropriate force to the staple, or nail, depending upon the material being stapled. Note: The softer the material, the less force will be required to drive in the staple or nail. Excessive force may damage the material being stapled.

How do you fix a one touch stapler?

When a Staples One-Touch Stapler jams, it’s usually because you have tried to insert the staples into the pull-out metal slider instead of into the body of the stapler. Turn the stapler upside down, tip out the staples and try again. If a staple is stuck in the stapler head, use a pair of tweezers to tease it out.

How does the paper pro stapler work?

PaperPro’s staplers use a patented staple-gun-like spring-and-lever mechanism to turn 8lbs of finger pressure into 30lbs of staple-driving force. PaperPro’s staplers use a patented staple-gun-like spring-and-lever mechanism to turn 8lbs of finger pressure into 30lbs of staple-driving force.

How do you open a Bostitch stapler 1500?

Standard Sized Stapler Basics

According to the instructions from Bostitch, hold down the bottom of the stapler with your free hand. Pull the arm upward to open the hinge that holds it over the carrying tray. Push the arm back until the tension on the hinge is relieved and the carrying tray is fully exposed.

What size is a 26 6 staple?

The most popular staple for office staplers is the 26/6. A standard 6mm staple. Most manufacturers produce a 26/6 staple and as long as your stapler says it uses 26/6 staples, you can usually use any brand version.

Why does my stapler keep jamming?

Originally Answered: Why do staplers jam? Cheap staples that are made of thin, softer wire and have blunt points are most likely to bend, crumple and fail to penetrate the layers of paper. Harder paper also resists the staple and causes crumpling.

How do you open a stapler?

Open the stapler.

To open these, grip the base of the stapler, then pull the top of the stapler until it lifts open and the staple tray is revealed. Back load staplers usually have a button on the back, so to open these, push the button until the stapler tray pops out slightly.