if its just the simple push button type you can hold your finger over the button, but if its the DESS type you would need a lanyard key to get it to start.

Can you bypass a Sea-Doo key?

No, you can not bypass any Sea-Doo with a DESS key. There is no magic button or a way to hotwire and if you try you might do more damage than good.

Can you start a jet ski without the key?

The easiest way to get a new jet ski key is to take your jet ski into a dealership. You CANNOT simply bring them the spare key and ask them to duplicate it. They will need your actual jet ski in the workshop so they can assess your particular model.

Can you bypass a Dess key?

As far as getting around the DESS, you can’t. It is programmed into the CDI box and the DESS post connects direct to it.

Are Sea-Doo keys interchangeable?

If you have more than one Sea-Doo, you can have them all programed the same. Just ask the dealership to key them all alike when you purchase them. A safety lanyard will not only help you keep the key to your Sea-Doo on you at all times, it’s for your safety as well.

What is MPEM on Sea-Doo?

What is an MPEM on a SeaDoo? On vintage 2-stroke Sea-Doos, the engine controller and the main electrical module were merged into one unit, called the MPEM (Multi-Purpose Electrical Module). This feature was responsible for controlling various functions, including: Start/stop function.

How do you start a Sea-Doo GTX?

Sea Doo iControl – 3 Starting Steps…
Press the red start/stop button before doing anything else. This activates the computer, which signals “Welcome to Sea-Doo” on the centre of my gauge cluster.Promptly plug in my DESS cord. If it’s on properly, I hear two beeps.Depress the red start/stop button again – and bingo!

How many keys come with a Sea-Doo spark?

Registered. I was surprised that my Spark came with one key. Usually when you buy a vehicle you get two. BRP confirmed you only get one.

Do all jet skis have keys?

Most new jet skis have both a key that operates the onboard security system and a kill switch key that will stop the engine if you fall off while riding.

How do you start a Sea-Doo Bombardier?

Clip your safety tether to your PFD or wrist strap. Place your feet on the footboards and, with your left hand on the left handlebar grip, press the “Start/Stop” button to activate the electronics. Attach the safety tether to the engine kill switch within five seconds of system activation.

How much does it cost to get a jet ski key made?

Most reasonable dealerships will charge between $25 and $50 for a replacement key. There are a few places that may charge less, and other places that may charge more. Some people end up paying as much as $150 for a replacement key.

What year did SeaDoo start using Dess?

Claw style SeaDoo DESS Key and ball DESS post introduced in 2014 on the SeaDoo Spark as a non DESS versions and all other SeaDoo models in 2015 with DESS. There is no limit to how many watercraft a DESS key can be programmed too.

How do I test a Ski Doo Dess key?

You should see continuity between both of the ground contacts in the side body of the key, and using the red test lead on either of the side ground contacts and the black test lead on the top center contact you should see less than 10 ohms of resistance on the IC serial chip.

Can I jump start a Sea-Doo?

You can jump start a Seadoo with a car in an emergency situation, but it is not recommended. A car has more amps and can produce too high of voltage for jump starting a jet ski which in turn can fry the electronics. Always try and charge your battery to start your ski.

Why is my Sea-Doo not starting?

A dead battery is the most common reason for a jet ski not starting. So, if your jet ski won’t start, before doing anything else immediately check the charge on your battery. If you turn the key and nothing happens, then it’s very likely the battery is totally shot and will have to be replaced.

How much does it cost to program a Dess key?

All Sea-Doo dealers sell DESS keys and can program them. The average cost can range anywhere from $25 to $150. This includes the price of the DESS key itself and the charge to program it. Dealers cannot program a DESS key without the actual personal watercraft in their presence.