Is it easy to fit basin taps?

Fitting new bathroom taps should be a straightforward enough project to take on yourself, so long as you use common sense and follow simple instructions. Obviously, where water is involved, if you make mistakes then things can go wrong quickly, so check out our step by step guide below on how you fit new taps.

How do you fit a basin tap?

Turn Off Your Water. First, you need to turn off the water supply for both hot and cold taps from the mains supply. Remove Your Old Tap. Get under your basin and unscrew the nut that locks the basin to your old tap. Install Your New Tap. Connect Your Plumbing. Switch Your Water Supply Back On.

How much do plumbers charge to change a tap UK?

Tap installation hourly rates

The average rate for a plumber to fit a tap is around £40 – £60 per hour – depending on their experience, the complexity of the installation and where you live.

Are all tap fittings the same?

Not all taps and countertop basins will be the same size, so you’ll want to make sure that there is adequate space from the top of your countertop basin to where the spout exits on the tap. Finally, make sure that you have enough space on your counter to mount your tap behind your basin.

What tools do I need to change bathroom taps?

To replace your bathroom taps, you’ll need the new taps you’re replacing the old ones with, a wrench, a backnut (which is usually supplied with your taps) and a bit of elbow grease.

Are basin taps a standard size?

Size Matters

Most taps in the UK are said to be a standard size, but it’s worth remembering that the size refers to the way in which the tap fits onto the pipes rather than the size of the taps themselves (basin taps being 1/2″ and bath taps having 3/4″ threads).

What are the 3 types of taps?

So what are the types of taps? There are 3 main taps you should be familiar with and they are: Taper, Plug, and Bottoming tap.