What are the error codes of LG washing machine?

LG front-load washer error codes
IE. Inlet water supply error. Check/ Repair. UE. Unbalanced load. Check/ Repair. OE. Drains slowly. Check/ Repair. FE. Water overflow error. Check/ Repair. PE. Water level sensor failure. Check/ Repair. dE. Door is open error. Check/ tE. Heating sensor error. Check/ LE. Locked drive motor error. Check/

How do I fix my LG washer error?

To fix this:
Unplug the washer for 10 seconds.Plug the washer back in, and press power button. Press the spin speed button until no spin is highlighted.Once the washer is drained, restart the washing cycle process.

How do I run diagnostics on my LG washer?

Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer. Keep the phone in place until the tone transmission has finished.

How do I clear the IE code on my LG washing machine?

Turn off the home’s hot and cold water supply taps/valve. Remove the water inlet hoses from the washer. Ensure to have a bucket to drain the remaining water from the hoses. Check the inlet filters on the inlet valves of the washer, inspect for any mineral deposits or other debris that may be clogging them.

Is there a reset button on a LG washing machine?

Perform hard reset

Unplug the washer. release, then hold down the PLAY/PAUSE button for 5 seconds. Plug the unit back in, if the unit does not power ON, it will require a repair service.

How do I fix error code 1E?

Disconnect the strainer, clean and rinse it, as it may become clogged. Check the condition of the hose. It is possible that it is pinched, clogged, bent or twisted. Unplug the washing machine: unplug the cord and plug it into the power outlet after 5-10 minutes to reset error code 1E.

What does 1E mean on LG top load washer?

Share. An IE error code indicates that the washer was unable to fill with water. During cold and freezing weather conditions, an IE error code could mean the water in the water supply lines are frozen. Once the temperature increases above freezing, the water supply will resume.

How do I fix OE error on LG top load washer?

Force drain the unit by starting a cycle and pausing it.

If you don’t have SPIN ONLY
Power the unit ON.Select a cycle.Press START/PAUSE button to START the cycle.Allow a few minutes to pass so the cycle begins.Press the START/PAUSE button to PAUSE the cycle.Run an empty wash cycle to see if issue occurs again.

How do I fix the OE code on my LG washer?

OE can be triggered by a kinked drain hose or a clogged drain pump filter.
Check for kinked drain hose. Check behind the washer to ensure that the drain hose is not kinked or clogged. Test the drain pump. Do you hear the humming sound? Clean drain pump filter. Run tub clean cycle. Request Repair.