How do you clean Softub vinyl?

Simple Stains: Wipe the area clean with a damp washcloth; doing so will remove any build-up. Wipe the area clean with a mixture of baking soda and water. 2. Tough Stains: When the tub is drained, use a soft soap and sponge to wipe the area clean.

How do you get wrinkles out of a Softub?

Completely fill the tub first. The proper level is 2” above the highest jet. VERY IMPORTANT: After adding approximately 2”-3” of warm water, if available, turn the water source off and remove all wrinkles from the bottom of the tub. After wrinkles are removed, continue to fill until water is 2” above the highest jet.

What chemicals do you need for a soft tub?

What Hot Tub Chemicals Do You Need?
Products to Adjust pH. To keep your hot tub pH in check, you should have a pH increaser and a pH decreaser. Non-Chlorine Shock. A shocking agent releases oxygen into the water, which serves a similar function as chlorine. Sequestering Agent. Sanitizer. Defoamer. Calcium.

How do I clean a vinyl hot tub?

Empty the bucket, and fill it with clean warm water. Rinse the sponge or cloth in the bucket, and wipe out the inner liner and exterior of the hot tub to remove any soap residue. If you’re cleaning an outdoor hot tub, rinse it with a garden hose and allow the excess water to drain.

How long does a Softub liner last?

Also, the vinyl in the tub is wrinkled up and stretched out. It’s not leaking, but it’s obvious that it’s not going to last a lot longer. Based on my experience, these have a useful lifespan of about 10 years if you’re lucky.

How long does a Softub last?

Depending on your water source, the Softcare Gon (metal & scale remover) should last about two months. Once your Softub Spa Frog® mineral purifier is exposed to water, it is active for four months only.

How do you maintain a Softub?

For the tub interior, use a damp cloth with clean water ONLY. Do not use soaps or abrasives to clean the interior of your Softub! Be sure to remove the filter and rinse it completely at least once every month. We recommend that you change the water in your Softub at least once every three to four months.

Why is my soft tub slimy?

Biofilm. The most common cause of slimy water in your hot tub is a bacterial substance called biofilm. This is caused by bacteria that grow in the warm water of your hot tub. They can live in the piping of your hot tub, on interior surfaces, or in the filter.

Can you use a soft tub in the winter?

Softub is ideal for winter. Backed by an industry leading 5 year warranty and manufactured in Sudbury Ontario, it is the perfect way to take the bone chilling cold out of the season!

How do I lower the pH in my Softub?

Add pH down when test strip indicates pH is above 7.8 ppm.
Make sure all equipment is OFF.Add 1/4 oz. (1-1/2 tsp.) pH Down for every 500 gallons of spa water. Turn ON circulation system for 30 minutes.Allow 8 hours for complete distribution.Retest water. If pH is still above 7.8, repeat steps 1-4.

Can you use vinegar to clean hot tub filters?

You can also use vinegar to clean your filters. Simply soak your filters in a 50% water and 50% vinegar solution for two hours. Keep in mind you may need to use an actual hot tub filter cleaner if it’s really grimy, or replace the filter if it’s beyond cleaning.

Can I use bleach to clean spa filter?

Bleach as a DIY Hot Tub Cleaner

Pros: Bleach is a powerful product that can destroy contaminants causing scum or bacteria buildup. Using a combination of bleach and water will leave your filter looking clean and sterilized. This may be helpful if you haven’t cleaned your filter in a while or is particularly dirty.

Do soft tubs have filters?

The filter is located inside the Softub and attaches over either one of the intake grates towards the bottom of the spa.

How do you get black mold off a hot tub cover?

You can use a mixture of one gallon of warm water, one teaspoon of mild dish detergent and one cup of bleach. Bleach will dry your hands and can sting, so wear gloves. You may want to also wear protective eyewear. Use a soft bristle brush or a sponge to clean the mold.

What to clean hot tub with after draining?

Once your tub is completely drained you will need to remove any sediment, dirt or debris from its surface, using a damp cloth wipe away as much of this as possible. We recommend you use a surface cleaner with a soft cloth or tub scrubber to remove any stubborn marks without damaging your hot tub.

Can I use magic eraser on hot tub?

Magic Erasers

Hot tub owners can use the sponges to clean any grime or build-up on the shell of their hot tubs. You can also gently wipe down the touch screen panels and use it to remove stubborn dirt on the skirting. Use a soft cloth and mild detergent to clean your hot tub cover.