Prep. Before you apply stain, make sure the surface is clean (no dust, dirt, wood fibers or grease), dry and free from mildew. Strip. Liberally apply SuperDeck® Stain & Sealer Remover using a roller. Neutralize. With a pump sprayer, apply the SuperDeck Revive® product. Water Drop Test. Stain. Enjoy.

How do you prepare a weathered deck for staining?

How-To Prepare a Deck for Staining
Thoroughly sweep the deck to remove all leaves and other debris.Liberally apply cleaner using a roller or pump sprayer (wear protective equipment to avoid contact with skin and eyes). After 15 minutes, work the cleaner into the surface using a stiff synthetic-bristle brush.

What kind of stain do you use on a weathered deck?

Clear finishes and transparent stains are fine for new wood, but for older decks, Starling recommends using a semitransparent stain. ”The grain still shows through, but the pigment gives the old wood a clean, uniform color and helps the new wood blend in,” he says.

How do you restore a badly weathered deck?

Before You Begin…STEP 1: Inspect the deck and repair any damage.STEP 2: Remove any flaking, loose finish.STEP 3: Protect the surrounding area.STEP 4: Clean an unfinished deck or strip a previously finished deck.STEP 5: Sand the deck to prepare it for staining.STEP 6: Stain and seal the deck.

Should you sand an old deck before staining?

Sand the Deck

If you plan to stain the deck, sand the surface before application to make the wood better absorb the coating. Use an orbital sander to remove any old gloss and smooth out any rough areas on decking boards. You may need to use a sanding sponge on the railings or balustrades.

Is it better to paint or stain an old deck?

While staining may take less time than painting, painting often does a better job of filling the cracks, covering imperfections, and provides longer lasting protection. Paint also is typically more rot resistance and does a better job of preventing mold and sun damage.

What happens if you stain weathered wood?

Using clear or translucent stains on weathered wood will result in a splotchy, uneven look. A semi-transparent stain will impart a little color to the deck wood while still allowing the grain to show through. If you need to replace boards in the decking, you could opt for a solid stain.

How do you treat a weathered deck?

Remove any damaged deck boards and cut off the rotted portion—all the way back to the centerline of the nearest joist. Use deck screws to reattach the good end, then cut a piece of like decking to fill the gap, and screw it to the joists. Check the handrails and balusters, then replace any damaged sections.

How do you treat weathered wood before painting?

Sand the old wood until the finish seems dull. Sanding produces dust, which may make it difficult for new paint to stick. As such, you should wipe the old wood surface with a mixture of 1 cup bleach, 1 cup trisodium phosphate (TSP) and 2 gallons water. Let the wood air-dry before you apply primer.

Is it ever too late to stain a deck?

Months to Weather New Wood: 2-3 Months for Transparent and Semi-Transparent colors. 12 months for Semi-Solid Colors. Number of Coats Applied to New wood: 1 Coat is suggested if the wood is under 12 months old. Restore-A-Deck Wood Stain can be applied to dry or damp wood.

What is the best wood deck restore product?

The best deck paint of 2021
Best overall: Kilz Over Armor Wood/Concrete Coating.Best to revive old wood: Rust-Oleum RockSolid 20X Deck Resurfacer.Fastest-drying wood stain: BEHR PREMIUM Transparent Quick Dry Oil Base Wood Finish.Highest rated: BEHR PREMIUM Porch & Patio Floor Paint.

What happens if you don’t sand before staining?

A lot of folks make the mistake of sanding to either too fine of a grit or not fine enough before applying stain. Too fine and the wood won’t be able to accept the stain. Too rough and the wood will be very dark almost to the point of being black.

How many coats of stain should you put on a deck?

Whatever type of stain you use, apply two coats to ensure there are no missed spots and to get a more uniform finish.

Can you use an orbital sander on a deck?

A random orbital sander is a specialized tool that sands wood in an elliptical pattern. It’s the most efficient sander to use when refinishing a deck, as they’re easy and practical to use.