The Open Shortest Path First Protocol (OSPF) One of the most widely used link-state routing protocols is OSPF.

What is an example of an EGP?

Examples of EGPs include:

Border Gateway Protocol (BGP) Exterior Gateway Protocol (EGP) The ISO’s InterDomain Routing Protocol (IDRP)

What is meant by link-state routing protocol?

Link state routing is a technique in which each router shares the knowledge of its neighborhood with every other router in the internetwork. Every router that receives the packet sends the copies to all its neighbors. Finally, each and every router receives a copy of the same information.

What routing protocols are RIP and RIPv2?

RIP and RIPv2 are distance vector routing protocols. OSPF and IS-IS are link state. EIGRP uses qualities from both distance vector and link state to create a hybrid routing protocol.

Which of the following protocols is designed to identify and eliminate switching loops?

The Spanning Tree Protocol (STP) is a networking standard designed specifically to prevent loops in Layer 2 switching, and to select the fastest network path if there are redundant links in the network. Here’s how STP works: First, all of the switches in the STP domain elect a root bridge, or root switch.

Which protocol is an EGP protocol?

Border Gateway Protocol (BGP) is the only Exterior Gateway Protocol (EGP) at the time.

Which of the following routing protocols is an EGP?

The Border Gateway Protocol (BGP) is the only currently viable EGP and is the official routing protocol used by the Internet.

Which protocol is a popular example of a link-state routing protocol Mcq?

Explanation: OSPF stands for Open Shortest Path First. It is a Link state routing protocol.

Which one of the following algorithm is popular example of a link-state routing protocol?

A common example of a link state protocol is the OSPF (Open Shortest Path First) routing protocol.

How many link state routing protocols are there?

There are three major protocols for unicast routing: Distance Vector Routing. Link State Routing.

Is RIP a link state protocol?

It’s a Distance Vector protocol that determines the transmission path based on the distance or hops count. It is a link-state protocol that determines the shortest path by analyzing many factors such as speed, cost, and path congestion. RIP permits a maximum of 15 hops. The metric is calculated in terms of Hop Count.

Which type of protocol is RIP?

Routing Information Protocol (RIP) is a distance-vector routing protocol. Routers running the distance-vector protocol send all or a portion of their routing tables in routing-update messages to their neighbors. You can use RIP to configure the hosts as part of a RIP network.

What is the difference between RIPv2 and RIPng?

RIP v1 is an older, no longer much used routing protocol. RIP v2 is a classless protocol and it supports classful, variable-length subnet masking (VLSM), CIDR, and route summarization. RIPng works basically in the same manner as RIP v2 with one notable exception. RIPng can only run on IPv6 networks.

Which of the following are routing protocols?

7 types of routing protocols
Routing information protocol (RIP) Interior gateway protocol (IGRP) Enhanced interior gateway routing protocol (EIGRP) Open shortest path first (OSPF) Exterior Gateway Protocol (EGP) Border gateway protocol (BGP) Immediate system-to-immediate system (IS-IS)

Why we use STP protocol?

Spanning Tree Protocol (STP) is a Layer 2 network protocol used to prevent looping within a network topology. STP was created to avoid the problems that arise when computers exchange data on a local area network (LAN) that contains redundant paths.

Which of the following protocols is used to detect and eliminate switching loops within a network?

The Spanning Tree Protocol (STP) is a network protocol that is used to eliminate bridge loops in Ethernet LANs. STP prevents network loops and associated network outage by blocking redundant links or paths.

Is BGP The only EGP protocol?

In 1989, the Border Gateway Protocol (BGP, RFC 1105) was introduced as a successor to EGP. Note that BGP is also an exterior gateway protocol (EGP) as opposed to interior gateway protocols (IGPs) such as RIP and OSPF. Unlike all other routing protocols, BGP doesn’t automatically discover other routers running BGP.

Which is an exterior gateway protocol?

Exterior Gateway Protocol (EGP) is the mechanism that allows the exterior gateway of an autonomous system to share routing information with exterior gateways on other autonomous systems. An autonomous system is a group of networks and gateways for which one administrative authority has responsibility.

Which of the following is a link state routing protocol that uses a metric of cost choose only one?

Routing protocol that uses a metric of cost , which is based on the link speed between two routers. OSPF is a popular IGP, because of its scalability, fast convergence, and vendor-interoperability.