Removing a spare tire without the factory tool is easy when you follow these steps:
Get under the truck.Pull off the guide tube.Pull out the key with pliers.Insert crank into the new hole.Turn the crank counterclockwise to lower the tire.

Where is the jack on 2018 Silverado?

The jack on the 2018 chevy silverado is located underneath the passenger seat on the driver side of the vehicle.

Where is the jack on a 2016 Chevy Silverado?

For double and crew cab models, the equipment is on the shelf behind the passenger side second row seat.
Turn the knob on the jack counterclockwise to lower the jack head to release the jack from its holder.Turn the wing nut counterclockwise to remove the wheel blocks and the wheel block retainer.

How do you loosen a lug nut?

Place the lug wrench on a lug nut and turn it counter-clockwise. Turn the wrench after you’ve secured it onto one of the nuts, pulling hard until you feel the lug nut begin to loosen. You don’t need to remove the lug nut entirely, just use the wrench to loosen it until it’s loose enough to remove with your fingers.

Should car be in neutral when changing tires?

DON’T leave the car in neutral

You’ll obviously want to leave the engine off before you start the tyre change, but the gearstick should be left in either first or reverse gear. The reason you want to do this is that the handbrake only operates on two wheels, usually the rear wheels to be exact.

How do I unlock my Chevy spare tire?

Locate the spare tire access hole on the right side of the rear license plate. In some newer model chevy trucks, you might need to use the ignition key to remove a locking device designed as a spare tire theft deterrent. If so, insert the key into the lock and turn the key to remove the lock.