Walking and Working Surfaces (Slips, Trips, and Falls)
Slips, trips, and falls constitute the majority of general industry accidents. Most of these types of accidents can be prevented with improved housekeeping, appropriate guardrails, maintenance of walking surfaces, and remaining alert to the work surroundings.

What can cause hazards on walking and working surfaces?

Safety on Walking and Working Surfaces
Cords lying on the ground or other walking areas.Water, oil, lubricants or other liquids spilled on the ground or on elevated areas at the site.Materials (pallets, boxes, etc.) Materials stored near ladders or in machine traffic areas.Poor lighting in walking or working areas.

Which of the following is a walking and working surface?

“Walking-Working Surfaces” include floors, aisles, stairs, ladders, roofs, platforms, dockboards and more.

What is walking hazard?

Walking seems harmless. It’s one of the best exercises for good health. Gait and stability problems top the list of walking hazards. Those issues may cause falls, especially on uneven pavement or ground, which can result in fractures and permanent disability.

What is a walking working surface?

Walking-working surface means any horizontal or vertical surface on or through which an employee walks, works, or gains access to a work area or workplace location.

What is a surface hazard?

Potholes in parking lots, cracked pavement, uneven sidewalks and loose dirt are just a few common outdoor walking surface hazards. Indoors, problems such as frayed carpets, cracked tile, loose floor boards and buckled entrance matting can all create hazards.

What type of surface has the highest risk of injury for walking?

Concrete and asphalt

Interestingly hard surfaces are easier on some areas of the body, such as the achilles tendon. Concrete is what most sidewalks are made out of, and it’s the hardest outdoor walking surface that you’ll likely find. It doesn’t give much, and it’s the toughest on your joints to walk on.

Can every walking or working surface be a potential fall hazard?

A fall hazard is anything at your worksite that could cause you to lose your balance or lose bodily support and result in a fall. Any walking or working surface can be a potential fall hazard.

Which of the following examples pose major fall hazards in the construction industry?

Injuries from falls are the most common cause of construction site fatalities. Some of the main causes of construction site falls are unprotected edges and openings, improper scaffolding construction or use and improper ladder use.

What are the potential hazards relating to materials handling injuries?

Some of the hazards in material handling include:
Workers being hit by materials, caught between them or in pinch points.Exceeding load limits.Falling caused by improperly stored materials.Poorly maintained lifting devices.Damaged racking & storage units.Material handling whilst on ladders, stools, etc.

What is uneven walking surface?

Uneven walking surfaces can take many forms, from cracks in pavement, to potholes in lots, uneven sidewalks, and steps – so they’re just about everywhere. It makes sense, then, that problems with the walking surface are the main cause of more than half of all slip and fall injuries.

What are the disadvantages of walking?

Disadvantages of Walking as an Exercise
Negligible Calorie Burn. If you look to exercise to burn calories and lose body fat, rethink walking.Neglects Upper Body. Reduced Cardiovascular Fitness. Reduced After-Burn Effect. Effects on Appetite. Too Strenuous.

Why is walking good for the environment?

Switching to walking or cycling for more of our shorter journeys helps to protect biodiversity. It creates less noise, less air pollution, and results in fewer emissions that are warming the atmosphere. We can help to protect our green spaces by showing its importance to communities, and to plant and wildlife.

What means work surface?

A work surface is a flat surface, usually in a kitchen, which is easy to clean and on which you can do things such as prepare food.

What type of injuries can occur in a struck by incident?

This is due to the numerous hazards that can create struck-by injuries. There are four common struck-by hazards in construction: struck-by flying objects, struck-by falling objects, struck-by swinging objects and struck-by rolling objects.

What is used when there are limited fall hazards?

include use of stairs, guardrails, and barriers to prevent the employee from direct and unprotected exposure to the fall hazard. These techniques prevent the fall before the onset.

How can hot surface hazards be prevented?

Get help when moving or carrying a heavy pot of simmering liquid. Never leave hot oil or grease unattended. Use potholders, gloves, or mitts when checking food on the stove, placing food in boiling water, or reaching into ovens and broilers. Never use wet material (like a damp towel) as a potholder.

What are atmospheric hazards?

Atmospheric hazards include things such as oxygen deficiencies, dusts, chemical vapors, welding fumes, fogs, and mists that can interfere with the bodies ability to transport and utilize oxygen, or that have negative toxicological effects on the human body.

What is the meaning of caution hot surface?

A Caution Hot Surface Sign is a warning message type of hazard sign which is used for being displayed and seen around areas where there is a need to warn people about any hot surfaces and the sign conveys the message “Caution Hot Surface” that means to warn of the dangers from surfaces which are hot.