Perform a Factory Reset as follows:
Press and hold the Setup button on the Cox remote for three seconds, until the red LED on the remote turns green.Enter 9-8-1. Result: The LED blinks green twice to indicate the remote has been reset.

Why is my Cox remote not working?

Batteries are low, dead, or inserted incorrectly. Verify the batteries are inserted in the correct direction. On the Cox cable receiver, press the Power button. If the box turns ON or OFF, then install new batteries in the remote and try again.

How do I resync my Contour remote?

Press and hold the CONTOUR button and wait for the remote light to change from red to green. Then type in the three-digit code on the TV screen. Press OK to complete the pairing. Once your remote is paired, follow the TV on-screen instructions to set up control for your TV and audio device.

How do I get my Cox Cable remote to work?

Just follow these steps to connect your remote to your TV:
Turn on your TV.Press and hold the setup button until the power button blinks twice, then release.Press and release the power button.Press and hold Select until your TV turns off, then release.

How do I reset my COX mini remote?

FACTORY RESET: If you wish to completely reset the remote by removing the RF pairing and programming for the TV’s power and volume functions, follow the steps below. 1. Press and hold the SETUP button for 3 seconds until the red indicator light turns on, then release.

Why does my remote not change channels?

Make sure there are no obstacles between the remote and your TV. Move closer to the TV and make sure the remote is pointed directly at the TV’s front panel. Make sure the batteries are installed correctly. Try fresh batteries.

How do I connect my remote to my TV?

Press the (Quick Settings) button on the remote control. Select Settings.

The next steps will depend on your TV menu options:
Select Remotes & Accessories — Remote control — Connect via Bluetooth or Activate button.Select Remote control — Connect via Bluetooth.Select Voice Remote Control — Activate button.

How do I fix an unresponsive remote?

Section B: Checking items of the remote control (common)
Make sure none of the remote buttons are jammed.Reset the remote. Clean the remote control terminals. Replace with fresh batteries. Perform a power reset on the TV. For Android TV/Google TV: symptoms may improve by updating the software of the remote control.

Why is my TV not responding to the remote?

Perform a reset

Unplug the TV’s power plug from the wall socket and wait for one minute after the LED light has switched OFF. After one minute only reconnect the power plug. Switch the TV back ON with the remote control. If the TV does not respond, press the button/joystick on the TV to switch the TV ON.