Perform a power reset. Press and hold the POWER button for ten seconds until the Blu-ray Disc player turns off. After the Blu-ray Disc player turns off, press the POWER button again to turn it back on. Press the OPEN/CLOSE button on the front of the Blu-ray Disc player to open the disc tray.

What do you do when your Sony DVD player wont open?

Follow the steps below to troubleshoot this issue:
Make sure the child lock feature is disabled.Try to open the disc tray.If the issue still occurs, power off your DVD player.Unplug the power cord for 30 seconds and then plug it back in.Power on your device.Try to open the disc tray.

How do I manually open my Sony DVD player?

To manually eject the CD/DVD drive tray from a Sony庐 CD/DVD drive, insert a pointed object, such as a paper clip, into the manual eject hole. NOTES: Not all CD/DVD drives have a manual eject hole. For example, slot loading optical drives do not have a manual eject option.

Is there a reset button on a Sony Blu-Ray player?

On the front of the player, press and hold the CONNECT and EJECT buttons at the same time until the EJECT button continuously blinks an amber light. When the amber light begins to blink on the EJECT button, release both buttons. NOTE: The player will turn off and restart.

How do you unfreeze a Sony Blu-Ray player?

Attempt a power reset to resolve this issue. To perform the power reset, press and hold the POWER button on the front of the Blu-ray Disc庐 player for 10 seconds. The Blu-ray Disc player should turn off.

How do you open a stuck Blu-Ray player?

Follow these instructions to open the disc tray and remove the disc.
Turn off your device.Unplug the power cord or AC adapter. Press and hold the OPEN/CLOSE button on the front panel of the disc player, and plug the power cord back in. After the tray opens, release the OPEN/CLOSE button.Remove the disc.

How do you fix a DVD player that won’t eject?

Press your CD player’s power and eject buttons down at the same time, holding them for about ten seconds. If your stereo has a “force eject” feature, it should spit out the CD. If this doesn’t work, start the car and try again.

Why is my Sony DVD player locked?

This would be an indication that the Child Lock feature is enabled. Follow these steps to unlock or release the tray: Turn on the Home Theater System. The message UNLOCKED will be displayed to indicate that DVD disc tray is unlocked.

How do you open a Sony Blu-Ray player?

Follow these instructions to open the disc tray and remove the disc.
Turn off your device.Unplug the power cord or AC adapter. Press and hold the OPEN/CLOSE button on the front panel of the disc player, and plug the power cord back in. After the tray opens, release the OPEN/CLOSE button.Remove the disc.

How do you get a stuck DVD out of a Blu-Ray player?

Disc stuck in my Blu-Ray player/DVD player
Turn off your device and disconnect the power plug for at least 10 seconds.Plug it back in and power ON your device.Press the eject button shortly after turning on the device. If this procedure does not work, don’t attempt to dislodge the disc yourself.

How do I force eject a disc?

2 Force Eject the Disc
Locate the pinhole on the front of the disc drive.Grab a pin, needle or uncoiled paper clip that fits into the pinhole.Insert the pin into the hole and push until the disc or tray pops out.It will only pop out a little. Pull it out with your hand the rest of the way.

How do I reset my Sony Blu-Ray player without a remote?

Turn off and unplug the Blue-Ray player, let it rest for 30 seconds. Press and hold the open/close button on the front of the player, reconnect the power cord, then release the button.

How do you factory reset a Sony DVD player?

Factory Reset on a Blu-ray Disc Player
On the supplied remote control, press the HOME button.Select Setup.Select Resetting or icon.Select Reset to Factory Defaults Settings.Select All Settings.Select Start.Select Close.Turn off your device, then turn it back on.

How do I reset my Sony media player?

Press the Home button. Select Settings. Select Resetting. Select Reset to Factory Default Settings.