If your boat is equipped with a power ventilation system (exhaust blower), turn it on for at least four minutes before starting your engine. This will help eliminate fuel vapors in the bilge. Before starting the engine, sniff the bilge and engine compartment for fuel vapors.

How many minutes should a blower be operated before starting an engine quizlet?

Before starting an inboard gasoline engine, you should operate the blower for at least 4 minutes and: sniff the blower exhaust for traces of gasoline fumes.

What should you always do before starting an inboard engine?

If you have an inboard gasoline engine, you need to turn on the blower for four full minutes before starting your boat. This very important step is to remove any fumes that could be lingering in the bilge. All portable fuel tanks must be filled off of the boat.

What is an important step in the fueling process of a boat?

Safety First!

Turn off engine(s), electronics, and extinguish all open flames. Keep the nozzle in contact with the edge of the fill to prevent build up of static electricity to prevent sparking. Don’t top off your tank. Know how much fuel your tank holds and fill it to about 90%.

Why should boaters slow down while passing recreational fishing boats?

This is not only a courtesy, it’s also an important part of maintaining safety on the water—as large wakes could cause a safety issue on the fishing boat you are passing. Someone could fall and hurt themselves, or they could be tossed overboard.

What should you do to avoid capsizing or swamping?

Here’s what you can do to reduce your risk of capsizing or swamping when out on the water:
Don’t overload your vessel.Balance the load of all passengers and gear.Turn vessel at controlled speeds.If anchoring, secure the anchor line to the bow of the vessel, never to the stern.

What does the blower do on a boat?

A Bilge Blower on a boat is a fan that is used to remove flammable fumes from the engine compartment. This is to help prevent an explosion in the engine compartment whenever the engine is turned on after sitting for an extended period of time. The fumes that build-up are usually caused by a leak in a gas line or hose.

Does an inboard motor need to be in the water to start?

Starting a boat without water is not recommended. Most outboard and inboard engines use impellers (rubber pumps) to run water to the boat’s cooling system. Without water to cool off and lubricate, the impeller will heat up super fast and possibly damage.

What should you do before fueling your boat quizlet?

What should you do before fueling your boat? Turn off the engine and close all windows, ports, doors, and other openings.

What should you do before fueling your boat?

Shut off all fuel valves and extinguish all open flames, such as galley stoves and pilot lights. Close all windows, ports, doors, and other openings to prevent fumes from entering the boat. Remove portable fuel tanks from the boat and fill them on the dock. Make sure that your fire extinguisher is within reach.

What is an important step in the fueling process of a boat quizlet?

What is an important step in the fueling process? Turn off engine(s), Which of the following actions is the best to take when fueling an outboard boat with a portable tank? Always refill your portable fuel containers on the pavement or dock to ensure a good ground.